weekened project

How to Make a String Tripod

By an eHow Contributor

Make a String Tripod

A string tripod is both a cheap and easy way to get a steady picture when a real tripod isn't available. It can also be used as a monopod and bipod in any given situation. Made from just rope, an eyehook and a nut, the string tripod can be used almost anywhere and is easily transported.

Difficulty: Moderately Easy

Instructions

Things You'll Need:

• Rope
• Eyehook
• Nut

1. 1

   Measure and cut the rope to about three times your height. This will place the camera at eye level when you are ready to use the tripod. You'll also want to tape or burn the ends of the rope to prevent them from unraveling. Make an overhand loop knot at one end of the rope and pull it tight.

2. 2

   Pull the loop knot through the eyehook and place the loop around the threads. Pull this tight to create a ring hitch. Screw the nut on to the eyehook.

3. 3

   Screw the eyehook into the tripod mount on your camera. When it's in as far as it will go screw the nut up to prevent the eyehook from coming unscrewed.

4. 4

   Create a monopod by placing your camera just below eye level and stepping on the rope where it meets the ground. Hold the other end of the rope tightly in one hand while also holding the camera. Pull the camera up to the level needed to take a picture, keeping the section of the rope attached to it taut to provide stability.

5. 5

   Create a bipod by placing the camera just below eye level and stepping on the rope with both feet at a comfortable distance from each other. Bring the free end of the rope up to the camera to create a triangular shape with the rope. When you have the rope taut and the camera at the level desired for taking the picture, you can pull the free end of the rope through the eyehook and secure it by tying a knot or simply hold that end of the rope tightly in one hand.

6. 6

   Create a tripod by taking the steps to make a bipod and attaching the free end of the rope to a nearby stationary item such as a pole or tree. Keep all sections of the rope pulled tightly. This will provide the most stability for your picture taking but is the most complicated to set up.